Globe Trailers
60-80 Ton Lowboys
Contact Us
- Capacity
- 80 ton
- Axles
- 5
- Deck length
- 30 ft
- Deck height
- 22 in
Overview
- 3+2 Axles - 22" Deck Height - 114" & 126" Swing Clearance - 28' Deck Length - 60-Ton Capacity - 22" Deck Height - 26' Deck Length - Hyd. Detach. Neck - 60-Ton Capacity - 22" Deck Height - 28' Deck Length - Hyd. Detach. Neck - 3+2 Axles - 24" Deck Height - 114" & 126" Swing Clearance - 26' Deck Length - 60-Ton Capacity - 22" Deck Height - 26' Deck Length - Hyd. Detach. Neck - 3 Axles - 24" Deck Height - 98" Swing Clearance - 26' Deck Length - 60-Ton Capacity - 22" Deck Height - 28' Deck Length - Hyd. Detach. Neck - 3+3+3 West Coast Setup - 24" Deck Height - 114" & 126" & 229" Swing - 28' Deck Length - 60-Ton Capacity - 22" Deck Height - 26' Deck Length - Hyd. Detach. Neck - 2+2+2 West Coast Setup - 22" Deck Height - 98" & 110" Swing Clearance - 28' Deck Length - 60-Ton HGG - 18" Deck Height (6" GC) - 28' Deck Length - NGB Detach. Neck Globe 60–80 Ton Lowboy Trailer specs at a glance: capacity 60–80 ton, deck height 22–24 in, deck length 28 ft, swing clearance 114–126 in, axle setup 3+2 / 3+3+3, hydraulic detachable gooseneck (RGN) — built to order in the USA. Looking to buy? Browse 60–80 Ton Lowboy Trailers for sale in our in-stock Globe Trailers dealer inventory, or call 1-800-800-3484 for a factory-direct quote. The 60–80 ton lowboy is a multi-axle trailer for the largest loads, with 3+2 and 3+3+3 axle arrangements for heavy, concentrated payloads. Configurations include 3+2 and 3+3+3 axle setups; deck length (about 28 ft) and swing clearance (114–126 in) are set to the load and route. Yes. It is built to order in the USA at Globe's Bradenton, Florida facility. Yes - Globe builds the 60–80 ton lowboy as a hydraulic detachable gooseneck (removable gooseneck / RGN) trailer for drive-on loading of the heaviest equipment. Request a quote online or call 1-800-800-3484 — every Globe 60–80 ton lowboy is build-to-order.
Specifications
Capacity
- 60–80 Ton Lowboy Trailers for sale
- in our in-stock Globe Trailers dealer inventory, or call 1-800-800-3484 for a factory-direct quote.
- Rated Capacity
- 60-80 ton tons
Frame
- Steel Type
- T-1 100K PSI yield strength steel
Safety
- Safety System
- Air lock safety system with safety bar
Hydraulics
- Flip Axle
- Patented hydraulic flip axle
Running Gear
- Air Bags
- 30K-lb air bags standard lbs
- Axle Configuration
- 3+2 (5 axles)
Decking
- Cross Member Spacing
- 12 inches in
General
- Fittings
- Centralized fittings (protected from equipment contact)
- Manufacturing
- 100% US-made, locally sourced steel, Bradenton, FL
Warranty
- Structural Warranty
- 10-year structural warranty
- Wheel Warranty
- 5-year STEMCO wheel warranty
Dimensions
- Deck Height
- 22" in
- Deck Length Range
- 28' to 30' ft
About lowboy trailers
A lowboy drops the deck between the gooseneck and the rear axles, putting the load 18 to 24 inches off the ground. That low center of gravity is what lets tall equipment — excavators, dozers, cranes, drill rigs — travel under bridges without an over-height permit. Fixed-neck lowboys load from the rear or side; detachable-neck models let the machine drive straight on from the front. Typical capacities run 35 to 60 tons, with multi-axle configurations reaching well beyond that.
Not sure this is the right type for your load? Tell us what you are hauling and we will recommend a capacity and deck.
