
Fontaine Trailer
Magnitude 60 DSR
- Capacity
- 60 ton
- Axles
- 3
- Deck length
- 26 ft
- Deck height
- 22 in
Overview
The Fontaine Trailer Magnitude 60 DSR is a 60-ton lowboy trailer with 3 axles, a 26-foot deck and a 22-inch loaded deck height. Trailers of this type typically haul excavators, dozers, cranes and drill rigs.
Specifications
Capacity
- Standard SpecificationsCapacityTrailerLength
- Width:GooseneckDesign:Swing radius:DeckDeck type:DSRDeck length:Deck width:8' 6" or 9"Loaded deck height/clearance:22 inches with 6 inches ground clearanceFlooring:2 inch nominal woodAxlesStandard trailer axles:3Axle Capacity:25,000 lb. nominal capacity per axle NOTE: GAWR determined by suspension type, brakes, tires and other components.Axle spread:54.5" or 60"BogieDeck to bogie connection:ModularRear bogie height:40 7/8 inches to top flange - 36 5/8 inches to top of bolstersDesign:Covered Rear Bogie:TiresTire size:
- CapacityTrailerLength
- Width:GooseneckDesign:Swing radius:DeckDeck type:DSRDeck length:Deck width:8' 6" or 9"Loaded deck height/clearance:22 inches with 6 inches ground clearanceFlooring:2 inch nominal woodAxlesStandard trailer axles:3Axle Capacity:25,000 lb. nominal capacity per axle NOTE: GAWR determined by suspension type, brakes, tires and other components.Axle spread:54.5" or 60"BogieDeck to bogie connection:ModularRear bogie height:40 7/8 inches to top flange - 36 5/8 inches to top of bolstersDesign:Covered Rear Bogie:TiresTire size:
- Axle Capacity
- 25,000 lb. nominal capacity per axle NOTE: GAWR determined by suspension type, brakes, tires and other components.
- 25,000 lb. nominal capacity per axle NOTE
- GAWR determined by suspension type, brakes, tires and other components.
General
- TrailerLength
- Width:
- DeckDeck type
- DSRDeck length:Deck width:8' 6" or 9"Loaded deck height/clearance:22 inches with 6 inches ground clearanceFlooring:2 inch nominal wood
- Deck type
- DSR
- Flooring
- 2 inch nominal wood
- BogieDeck to bogie connection
- ModularRear bogie height:40 7/8 inches to top flange - 36 5/8 inches to top of bolstersDesign:Covered Rear Bogie:
- Deck to bogie connection
- Modular
- Rear bogie height
- 40 7/8 inches to top flange - 36 5/8 inches to top of bolsters
Gooseneck
- GooseneckDesign
- Swing radius:
Dimensions
- Deck width
- 8' 6" or 9"
- Loaded deck height/clearance
- 22 inches with 6 inches ground clearance
Axles
- AxlesStandard trailer axles
- 3Axle Capacity:25,000 lb. nominal capacity per axle NOTE: GAWR determined by suspension type, brakes, tires and other components.Axle spread:54.5" or 60"
- Standard trailer axles
- 3
- Axle spread
- 54.5" or 60"
About lowboy trailers
A lowboy drops the deck between the gooseneck and the rear axles, putting the load 18 to 24 inches off the ground. That low center of gravity is what lets tall equipment — excavators, dozers, cranes, drill rigs — travel under bridges without an over-height permit. Fixed-neck lowboys load from the rear or side; detachable-neck models let the machine drive straight on from the front. Typical capacities run 35 to 60 tons, with multi-axle configurations reaching well beyond that.
Not sure this is the right type for your load? Tell us what you are hauling and we will recommend a capacity and deck.

